User`s manual

Installing the Motherboard in the Chassis
After installing the CPU and memory modules, you can install the motherboard in the system
housing. There are many system housing designs and you should consult your system housing
documentation for specific installation information.
Installing the Motherboard
To install the motherboard into the chassis:
1. Review the housing documentation and prepare the required mounting hardware.
2. Identify the mounting holes on the board and confirm that the housing standoffs are suitably
placed.
3. Install the included rear I/O panel shield in the housing’s I/O panel opening, matching the
ports on the board.
4. Insert the board in the housing and align the mounting holes to the standoffs on the housing’s
motherboard mounting plate. Check to make sure all rear I/O ports are aligned with the
openings in the I/O panel shield.
5. Attach the board to the housing by inserting mounting screws in all the holes and tightening
these screws using a Philips head screwdriver.
3 - 9 User’s Manual