User`s manual

3: BIOS Setup Utility
25
Resources
Controlled By
You should leave this item at the default Auto
(ESCD). Under this setting, the system
dynamically allocates resources to plug and play
devices as they are required. If you cannot get a
legacy ISA (Industry Standard Architecture)
expansion card to work properly, you might be
able to solve the problem by changing this item to
Manual, and then opening up the
IRQ Resources
and
Memory Resources
sub-menus.
In the
IRQ Resources
sub-menu, if you change
any of the IRQ assignations to Legacy ISA, then
that Interrupt Request Line is reserved for a
legacy ISA expansion card. Press
Esc
to close
the IRQ Resources sub-menu.
PCI/VGA Palette
Snoop
This item is designed to overcome some problems
that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system
that does not require palette snooping so you
must leave this item disabled.