User`s manual

Mainboard User’s Manual

PnP/PCI Configurations Page

This page sets up some parameters for devices installed on the PCI

bus and those devices that use the system plug and play capability.

PnP/PCI Configurations

Item Help

PNP OS Installed Yes

Reset Configuration Data Disabled

Resources Controlled by Auto(ESCD)

x IRQ Resources Press Enter

x DMA Resources Press Enter

PCI/VGA Palette Snoop Disabled

Menu Level

Select Yes if you are using

a Plug and Play capable

operating system Select

No if you need the BIOS to

configure non-boot

devices.

↑

↑↑

↑

↓

↓↓

↓

→

→→

→

←

←←

←

: Move Enter : Select +/-/PU/PD:Value F10: Save ESC: Exit F1:General Help

F5:Previous Values F6:BestPref. Defaults F7:Optimized Defaults

PNP OS Installed

Setting this option to “Yes” allows the PnP OS

(instead of BIOS) to assign the system resources

such as IRQ and I/O address to the ISA PnP

device.

Reset

Configuration Data

If you enable this item and restart the system, any

PnP configuration data stored in the BIOS setup is

cleared from memory. New updated data is

created.