User`s manual

Mainboard User’s Manual
16
Halt On
This item defines the operation of the system POST
(Power On Self Test) routine. You can use this item
to select which types of errors in the POST are
sufficient to halt the system.
Base/Extended/
Total Memory
These items are automatically detected by the
system at start up time. These are display-only
fields. You can’t make changes to these fields.
Advanced BIOS Features Page
This page sets up more advanced information about your system.
Take care of this page with caution. Any changes can affect the
operation of your computer.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Advanced BIOS Features
Item Help
Virus Warning Disabled
Quick Power On Self Test Enabled
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device CDROM
Boot Other Device Enabled
Swap Floppy Drive Disabled
Boot Up Floppy Seek Disabled
Boot Up NumLock Status On
Gate A20 Option Normal
Typematic Rate Setting Disabled
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
Security Option Setup
OS Select For DRAM > 64MB Non-OS2
Video BIOS Shadow Enabled
C8000-CBFFF Shadow Disabled
CC000-CFFFF Shadow Disabled
D0000-D3FFF Shadow Disabled
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
↑
↑↑
↑ ↓
↓↓
↓ →
→→
→ ←
←←
←
: Move Enter : Select +/-/PU/PD:Value F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:BestPref. Defaults F7:Optimized Defaults
Virus Warning
This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
built-in virus protection.