User`s manual

3: BIOS Setup Utility
15
Standard CMOS Features Page
This page helps you set up basic information such as the date and
time, the IDE devices, and the diskette drives.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Standard CMOS Features
Item Help
Date (mm:dd:yy) Mon Dec. 3 2001
Time (hh:mm:ss) 14 : 49 : 26
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A 1.44M, 3.5 in.
Drive B None
Video EGA/VGA
Halt On All , But Keyboard
Base Memory 640K
Extended Memory 65535K
Total Memory 1024K
Menu Level
Change the day, month,
year and century.
↑
↑↑
↑ ↓
↓↓
↓ →
→→
→ ←
←←
←
: Move Enter : Select +/-/PU/PD:Value F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:BestPref. Defaults F7:Optimized Defaults
Date & Time
Use these items to set the system date and time
IDE Devices
Your computer has two IDE channels (Primary and
Secondary) and each channel can be installed with
one or two devices (Master and Slave). Use these
items to configure each device on the IDE channel.
Press
Enter
to display the IDE sub-menu. Press
Esc
to close the IDE device sub-menu and return to
the Standard CMOS Features page.
Floppy Drive A
Floppy Drive B
Use these items to set the size and capacity of the
floppy diskette drive(s) installed in the system.
Video
This item defines the video mode of the system.
This mainboard has a built-in VGA graphics system;
you must leave this item at the default value.