User`s manual

2: Mainboard Installation

Install the Mainboard

Install the mainboard in a system chassis (case). The board is an

ATX size mainboard with a twin-tier of I/O ports. Make sure your

case has an I/O cover plate that matches the ports on this

mainboard.

Install the mainboard in a case. Follow these instructions of the

case manufacturer to use the hardware and internal mounting

points on the chassis.

Connect the power connector from the power supply to the ATX

connector on the mainboard.

If there is a cooling fan installed in the system chassis, connect the

cable from the cooling fan to the JFAN2 fan power connector on

the mainboard.

Connect case switches and indicator LEDs respectively to the

PANEL switch and LED connector header.

JFAN2

ATX

PANEL