User`s manual

CPU Internal Cache CPU Internal Cache Default: Enabled

All the processors that can be installed in this mainboard use internal

level 1 (L1) cache memory to improve performance. Leave this item at

the default value for better performance.

External Cache Default: Enabled

Most processors that can be installed in this system use external level 2

(L2) cache memory to improve performance.

CPU L2 Cache ECC Checking Default: Enabled

This item enables or disables ECC (Error Correction Code) error

checking on the CPU cache memory. We recommend that you leave

this item at the default value.

Processor Number Feature Default: Enabled

Some new processors are installed with a unique processor number.

This number may be used for verification in Internet transactions and e-

commerce. If you prefer not to use or distribute the unique processor

number, set this item to Disabled to suppress the processor number.

Quick Power On Self Test Default: Enabled

You can enable this item to shorten the power on testing (POST) and

have your system start up a little faster. You might like to enable this

item after you are confident that your system hardware is operating

smoothly.

1st/2nd/3rd Boot Device Default: Floppy/HDD-0/LS/ZIP

Use these three items to select the priority and order of the devices that

your system searches for an operating system at start-up time.

Boot Other Device Default: Enabled

If you enable this item, the system will search all other possible loca-

tions for an operating system if it fails to find one in the devices

specified under the first, second and third boot devices.

Swap Floppy Drive Default: Disabled

If you have two floppy diskette drives in your system, this item allows

you to swap the assigned drive letters so that drive A becomes drive B,

and drive B becomes drive A.