User`s manual
30
Add-in Card Options
3V
+
ATX1
AGP1
PPGA1
FDD1
IDE1
IDE 2
DIMM1
WOM1WOL1
CD1
PWRFAN1
CPUFAN1
PANEL1
DIMM2
DIMM3
PCI1
PCI3
PCI4
PCI2
CD2
ISA 2
ISA 1
JP1
JP4
JP3
JP2
JP5
JP7
JP6
SIR1
BT1
USB2
1
1
1
1
1
1
1
1
1
AMR1
IR1
WOL1 WOM1
USB2
1
1
WOL1: Wake On LAN
If you have installed a network adapter (LAN adapter), you can
use the cable provided with the card to plug into the WOL con-
nector on the mainboard. This is the Wake On LAN feature.
When your system is in a power–saving mode, any traffic
through the network automatically resumes the system.
WOM1: Wake On Modem
If you have installed a fax/modem card, you can use the cable
provided with the card to plug into the WOM1 connector on the
mainboard. This is the Wake On Modem feature. When your
system is in a power–saving mode, any incoming calls to the
modem automatically resume the system.
Note: To use WOM or WOL, you must enable the item using the
Power Management page of the setup utility. See Chapter 3.
USB2: USB ports 3/4 connector
Some cases come with USB ports on the front panel. If your case
has these ports, you can connect them to the USB2 connector.