User`s manual

Before You Begin

Before you begin to install your mainboard, take care not to

damage the product from static electricity. Ensure too that you

are installing the mainboard into a suitable case.

Static Electricity

In adverse conditions, static electricity can accumulate and dis-

charge through the integrated circuits and silicon chips on this

product. These circuits and chips are sensitive and can be per-

manently damaged by static discharge.

• If possible, wear a grounding wrist strap clipped to a

safely grounded device during the installation.

• If you don’t have a wrist strap, discharge any static by

touching the metal case of a safely grounded device be-

fore beginning the installation.

• Leave all components inside their static-proof bags until

they are required for the installation procedure.

• Handle all circuit boards and electronic components

carefully. Hold boards by the edges only. Do not flex or

stress circuit boards.