User guide

23
Exporting your Timeline to DV tape
Preferences dialog box as explained in your Matrox RT.X100 Xtreme
Installation and User Guide.
¦NoteIf you’re using a camcorder, switch it to VTR Mode.
2 Load a tape that you’ve striped with time code into your device.
3 Open the project you want to export to tape.
4 Choose File > Export > Export to Tape. This displays the following
dialog box:
5 Indicate which Channels you want to export by selecting Export video
and/or
Export audio. If you decide to export audio only, black video will
accompany your audio.
6 By default, the edit points are displayed in time code format. If you would
like to display the edit points in frames, select
Show time code in frames.
¥Tip To toggle between the two formats, press CTRL+SHIFT while the
insertion point (flashing vertical bar) is in a time code field.
7 Under Device Format, select Matrox DV/DVCAM to record to a standard
DV device, or
Matrox DVCPRO to record to a DVCPRO device.
8 To mark the In point where you want to start recording on your tape, play
your tape using the transport controls provided in the dialog box, then click
the
Mark In button when you see the frame you want. You can also type the
In point you want in the
Mark In field.
9 Under Export Setup, specify how you want the export to be done, such as
whether you want to record color bars at the start of your tape, and record
your entire project or just the work area.