User guide

16
Chapter 2, Defining Your Adobe Premiere Pro Settings
5 To select the audio and video sources from which you want to capture
material, click the
A/V Inputs button.
6 From the Video Source list, select Composite, S-Video (Y/C), or
DV-1394. For example, to capture your composite input to Matrox RT.X,
select
Composite. To capture material from your DV-1394 device over the
1394 interface, select
DV-1394. If you want to capture material from your
DV camera or deck using device control over the 1394 interface, you must
set up the device control as explained in your Matrox RT.X100 Xtreme
Installation and User Guide. If you don’t set up this device control, you can
capture your clips by manually controlling your DV-1394 device.
¦NoteIf you selected DV-1394 as your video source and you set the Capture
Format
to Matrox AVI Capture, video will be captured in native DV format
over the 1394 interface.
7 If you selected an analog video source, you must also select the audio source
from which you want to capture material from the
Analog Audio Source
list. Your audio source must match your audio input (that is, where you’ve
connected the light blue connector labeled
TO AUDIO CARD IN on your
breakout cable, as explained in your Matrox RT.X100 Xtreme Installation
and User Guide. For example, if you plugged the
TO AUDIO CARD IN