User guide

72
Chapter 5, Defining Your Adobe Premiere Settings
4 Choose File > Export Timeline > Export to Tape. This displays the
following dialog box:
5 Indicate which Channels you want to export by selecting Export video
and/or
Export audio. If you decide to export audio only, black video will
accompany your audio.
6 By default, the edit points are displayed in time code format. If you would
like to display the edit points in frames, select
Show time code in frames.
¥Tip To toggle between the two formats, press CTRL+SHIFT while the
insertion point (flashing vertical bar) is in a time code field.
7 To mark the In point where you want to start recording on your tape, play
your tape using the transport controls provided in the dialog box, then click
the
Mark In button when you see the frame you want. You can also type the
In point you want in the
Mark In field.
8 Under Export Setup, specify how you want the export to be done, such as
whether you want to record color bars at the start of your tape, and record
your entire project or just the work area.
¦NoteYou can enter values in the Duration fields only. The In Point fields
are automatically adjusted for you based on the values you enter in the
Duration fields. Items are recorded on your tape in the order they are listed
in the dialog box.
$ Color Bars To add color bars at the start of your recording, enter a
duration for the amount of time you want the color bars to be recorded.
¦NoteColor bars are accompanied by a 1-kHz audio tone.