User guide

51
Defining your General settings
is XtremePreview?” on page 169). XtremePreview is disabled when you
select
Always output to 1394.
$ Always output to 1394 Outputs your Timeline over the 1394 interface
to your DV-1394 device whenever you play back the Timeline. You’ll be
able to preview the output on your NTSC or PAL monitor, as well as on
your DV-1394 device’s viewfinder. This feature cannot be used at the same
time as XtremePreview.
6 Under 1394 Audio Capture, select which DV stereo audio streams you
want to capture. If you capture only one DV stereo stream, the audio stream
of your stereo clip will be embedded in your .avi file, creating a single
interleaved audio and video file. If you choose to capture both DV stereo
streams, the second audio stream will be saved to a separate audio file named
clipID_2ndStream.wav.
Remarks
$ Some DV-1394 devices let you capture only one stereo audio stream. For
more information, consult the documentation that came with your DV-1394
device.
$ When capturing audio over the 1394 interface with certain DV devices
(such as Sony or Canon), the left and right channels may be inverted in the
resulting file. If this happens, you can select
Invert left and right channels
to correct this problem.
7 If you have an NTSC system, under Tape Time Code Format, select the
format that matches the format on your DV tapes.
8 Click OK to return to the Project Settings dialog box.