User guide

29
5. Connect your composite and S-Video devices
2 To connect your composite video recorder, use another composite (RCA)
audio/video cable or three more separate cables with RCA connectors. On
the output side (
OUT) of your breakout cable:
a Connect the yellow VIDEO jack to the video input on your video recorder.
b Connect the white AUDIO-L jack to the left audio input of your video
recorder.
c Connect the red AUDIO-R jack to the right audio input of your video
recorder.
3 To display the output from Matrox RT.X100 Xtreme on your NTSC or PAL
video monitor
1
, you can connect your video monitor to the breakout cable or
your recorder. For an illustration of typical composite connections that you
can use, see “Composite connections using separate source and record
devices” on page 25.
1
You can use a TV in place of an NTSC or PAL video monitor. If your TV has a TV/VIDEO
input switch, set it to VIDEO.
VIDEO
IN
AUDIO
IN
L
R
AUDIO-RVIDEOS-VIDEO
OUT
AUDIO-L
Video
recorder