User guide

23
3. Typical RT.X100 Xtreme connections
3. Typical RT.X100 Xtreme connections
The following illustrations show some typical audio and video connections for
capturing and printing to tape. If you require a typical studio setup, you can
quickly set up your editing system by referring to these illustrations. For more
details on how to connect your devices, see “4. Connect your DV-1394 device”
on page 26 and “5. Connect your composite and S-Video devices” on page 27.
¦NoteIn these illustrations, we’ve connected a video monitor (NTSC or PAL)
to view the signal that is being captured or recorded, and we’re monitoring audio
from the sound card to the computer speakers (requires you to connect the small
connectors to the corresponding jacks of your computer’s sound card, and your
computer speakers to the
AUDIO jack of the RT.X100 Xtreme card as explained
on page 20).
DV-1394 connections
OUT
Video monitor
or television
Computer speakers
DV-1394 Device
DV VIDEO
VIDEO
IN
AUDIO L
VIDEO
S-VIDEO
AUDIO R
L
R
AUDIO OUT
R
L
VIDEO OUT
S-VIDEO
OUT
AUDIO IN
R
L
VIDEO IN
S-VIDEO
IN
To AUDIO connector
on RT.X100Xtreme card
To RT.X100
Xtreme
RT.X100 Xtreme
breakout cable
To RT.X100
Xtreme