User guide

211
Overview of the Matrox MediaExport dialog box
Overview of the Matrox MediaExport dialog
box
When you start MediaExport, a dialog box similar to the following appears:
Here’s a brief description of the
Matrox MediaExport dialog box:
✐ Destination Lets you specify the destination folder for your encoded files
and assign the base file name. For more information, see “Exporting clips
from the Timeline” on page 212.
✑ Work area only Select this option if you want to export only the clips
under the work area bar of your Adobe Premiere Timeline. For more
information, see “Exporting clips from the Timeline” on page 212.
✒ Session window Lists the encoding profiles that have been selected for
use in the current encoding session. The columns show encoding settings for
each profile. For more information, see “Selecting encoding profiles for use
in the session window” on page 213.
 Input source Lets you use either full frames or the first field of each
frame as the input source for your encoded video. To achieve the best video
quality, select
Frame as input. However, if you crop your source video or
output your video to non-standard frame sizes (frame sizes with heights that
are not multiples of 480 for NTSC or 576 for PAL), the best video quality is
achieved by selecting
Field as input.
✔ Crop button Opens the Crop Source Video dialog box where you can
trim the edges of your source video. For more information, see “Exporting
clips from the Timeline” on page 212.
✑
✒

✔ ✕
✖
✗
✘
✐