User guide

8 Matrox Rainbow Runner G-Series – User Guide
2 If a DVD add-on card is attached to
your Matrox graphics card:
Move the DVD add-on to your
Rainbow Runner G-Series card
a Carefully remove the DVD add-on from
your Matrox graphics card.
b Position the DVD add-on card over the
Rainbow Runner G-Series card so the
connectors and the support pin line up.
c Press the two cards together slowly and
evenly until the connectors are fully joined
and the plastic support pin snaps into
place.
WA R N IN G : If the cards are not
separated carefully, they could be
damaged.
WA R N IN G : If the cards are not
properly aligned, they could be
damaged when combined.
Matrox graphics
card
DVD add-on
card
Support pin
Rainbow Runner
G-Series card
Support pin