Installation guide

Matrox Graphics Card – Installation Guide 7
4
Insert your Matrox card
Remove the cover for the slot you intend to use. Save the screw for the mounting bracket.
Position your Matrox card over the PCI expansion slot you’ve chosen. Push the card in firmly
and evenly until it’s fully seated in the slot. Replace the screw to secure the bracket of your
Matrox card to the computer chassis.
5
Connect the monitor
Simply plug your monitor cable into the monitor connector on your Matrox card. Make sure the
other end of the monitor cable is properly connected to your monitor. See your monitor manual
for more information.
Side-view of your Matrox card
Bracket screw
PCI expansion slot
Matrox graphics card
Motherboard
Monitor connector (blue) Rainbow Runner
video connector (black)
Bracket