Installation guide

Matrox Graphics Card – Installation Guide 17
Solution
If possible, update your Matrox display driver. Matrox makes new display drivers
available on the Matrox Web site (www.matrox.com/mga) and BBS (514-685-6008).
Solution
Windows 95: Disable Matrox hardware acceleration.
1 Right-click the My Computer icon on the Windows desktop background.
2 Click the Properties menu item  Performance tab  Graphics button.
3 Move the Hardware acceleration slider to None.
4 Click OK  Close  Yes to accept the changes and restart your computer.
Problem: After restarting my computer, Windows 95 warns that
the graphics card is not configured correctly
Cause
You may have a conflict because of previously installed display drivers.
Solution
Delete all existing display drivers and reinstall MGA display drivers.
1 If Windows 95 prompts you to start the Add New Hardware Wizard, click Cancel.
(If you start the Wizard, it will not detect your graphics card.)
2 Right-click the My Computer icon on the Windows 95 desktop.
3 Click the Properties menu item  Device Manager tab.
4 Click the plus sign next to Other devices (if it appears) and Display
adapters
.
5 Delete all listed display adapters (click each, then click Remove), then
click
OK.
6 Restart your computer and reinstall the MGA display drivers (see
page 6).
Note: If you identify a program that doesn’t work well with MGA acceleration, please contact
Matrox technical support and describe the problem. This information may help us come up with
a fix or work-around in a future driver release.
eng_inst.print.book Page 17 Tuesday, February 17, 1998 4:39 PM