User guide

8 Matrox AuroraVX3mp – User Guide
Connection setup
This section describes how to connect monitors to your Matrox product.
Step-by-step connection setup
1 Attach the triple-monitor cable
Attach your Matrox triple-monitor cable to the
connector on the bracket of your Matrox card.
Make sure the connectors are properly fastened.
2 Connect the navigation console
Your navigation console must use an HD-15
connector.
Connect your navigation console to the DVI
connector labeled
3/NAV of your triple-monitor
cable using the DVI-to-HD15 adapter included
with your product.
3 Connect the first imaging display
Connect your first imaging display to the DVI
connector labeled
1/IMG1 of the triple-monitor
cable.
WA R N I N G : Don’t change monitor connections while your computer is turned on. While
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections.
Some devices may be permanently damaged if incorrect settings are
used.
Note: Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened.
Triple-monitor
cable
DVI-to-HD15
adapter
Monitor connector
(HD-15)
DVI connector