User guide

6 Matrox AuroraVX3mp – User Guide
2 Choose an expansion slot
Most computers have different types of
expansion slots. Choose a PCI Express ×16
(PCIe) slot for your Matrox card. Your
system manual should identify the location
of each type of expansion slot in your
computer.
3 Insert your Matrox card
a Position your Matrox card over the
expansion slot you’ve chosen.
b Push the card in firmly and evenly until
it’s fully seated in the slot.
c Secure the bracket of your Matrox card
to the computer frame.
Your Matrox card is now installed.
Before restarting your computer, connect your monitor or
monitors (see “Connection setup”, page 8).
After connecting, restart your computer and install your
Matrox software (see “Software setup”, page 12).
(64-bit)
(Back of computer)
(32-bit)
PCI
Express
slots
(×16)
(×1)
PCI
slots
WA R N I N G : Inserting your Matrox card
into the wrong type of slot could damage
your card, your computer, or both.
PCI Express ×16 card
WA R N I N G : If your computer doesn’t restart after your Matrox card is installed, turn off
your computer to avoid damaging electronic parts. For troubleshooting information, see
page 13.