User guide

4 Matrox AuroraVX3mp – User Guide
Installation overview
To install your Matrox product:
1 Install the Matrox card – see “Hardware installation”, page 5.
2 Connect your monitors – see “Connection setup”, page 8.
3 Install the software – see “Software setup”, page 12.
4 Set up the software – see “Display setup”, page 10.
Note: If your Matrox product is already partially or fully installed on your computer, some
or all the installation information in this guide may not apply to you. However, this
information may be useful if you need to reinstall your Matrox product.