User guide
Table Of Contents
26 Matrox AuroraVX3mp – User Guide
!
Your Matrox card is 100% VGA compatible and supports all VESA standards: VBE 2.0
(Super VGA modes), DPMS (energy saving), DDC-2B (Plug-and-Play monitor), and
DDC-CI.
!
The display resolutions and refresh rates available depend on your Matrox graphics card,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
!
Your primary display must be an analog monitor, and it must be used as your Navigation
Console.
!
While using Twin Imaging Displays, both displays must be the same type and use the
same monitor settings and display orientation.
!
While using stretched mode, a mouse pointer drawn by graphics hardware isn’t available
on Twin Imaging Displays.
!
Hardware overlay isn’t available on Twin Imaging Displays.
!
While using 3 displays at a time
all
at the highest display resolution, certain display
limitations may apply.
Digital monitor information
!
TMDS (Transition Minimized Differential Signaling) encoding
!
DDWG (Digital Display Working Group) compliant DVI connector
!
EDID (Extended Display Identification Data) 1.2, 1.3 (without the extended data block),
and 2.0 support