Installation guide

6 Matrox Graphics Card – Installation Guide
4
Insert your Matrox card
Remove the cover for the slot you intend to
use. Save the screw for the mounting bracket.
Position your Matrox card over the expansion
slot you’ve chosen. Push the card in firmly and
evenly until it’s fully seated in the slot.
Replace the screw to secure the bracket of
your Matrox card to the computer frame.
5
Connect the monitor
Simply plug your monitor cable into the
monitor connector on your Matrox card. Make
sure the other end of the monitor cable is
properly connected to your monitor. See your
monitor manual for more information.
Expansion
slot
Graphics
card
Motherboard
Bracket screw
Matrox card
Monitor cable