Installation guide

Matrox Graphics Card – Installation Guide 37
Matrox add-ons (sold separately)
Video specifications
 Separate sync monitors only
 The video follows the PS/2 standard, with no sync on RGB, and no blanking pedestal. Black
or blank – 0.0 V; White – 0.700 V.
 There are five connections to a monitor that uses BNC (Bayonet Nut Connect) connectors –
R, G, B, HSYNC (white or gray wire), and VSYNC (black wire).
Environmental specifications
 Minimum/maximum ambient operating temperatures: 0 to 55º C
 Minimum/maximum storage temperature: -40 to 75º C
 Maximum altitude for operation: 3,000 meters
 Maximum altitude for transport: 12,000 meters
 Operating humidity: 20 to 80% relative humidity (non-condensing)
 Storage humidity: 5 to 95% relative humidity (non-condensing)
Monitor connector pinouts
Productiva G100 4MB Productiva G100 8MB Mystique G200 Millennium G200 Millennium G200 SD 8MB Millennium G200 SD 16 MB Millennium G200 LE
Memory ——
8MB
SDRAM
8MB
SGRAM
8MB
SDRAM
——
Rainbow Runner G-Series
(video editing card)

—
DVD decoder

*
* For graphics cards shipped with computers, this model may not support this add-on. For more information, check with
the maker of your computer.

*

—
TV output
†‡
† TV output: Composite video and S-video output (NTSC and PAL)
‡ Matrox TV output and digital flat panel add-ons can’t be used at the same time.

—

—
Flat panel
‡
—

—

*

*

—
1 Analog red output
2 Analog green output
3 Analog blue output
4 Not connected
5–8 Ground
9+5 V (DDC)
10 Ground
11 Not connected
12 SDA (DDC)
13 TTL horizontal sync
14 TTL vertical sync
15 SCL (DDC)
6
1115
15
10