Installation guide

Matrox Rainbow Runner TV – Installation Guide 7
3
Insert your TV tuner card
Remove the cover for the slot you intend to
use. Save the screw for the mounting
bracket. Pick up your TV tuner card and
position it over the expansion slot you’ve
chosen. Push the card in firmly and evenly
until it’s fully seated in the slot. Replace the
screw to secure the bracket of your
TV tuner card to the computer chassis.
4
Connect the ribbon cable
Use the ribbon cable that came with your
Rainbow Runner TV card. Attach one end
to the top of your Matrox graphics /
Rainbow Runner Studio card. Attach the
other end to your Rainbow Runner TV card.
The holes in the connector on each end of the ribbon cable and the connector pins on each card
are made so that they only fit one way.
5
Reconnect
Reconnect the cables you disconnected earlier.
Your Rainbow Runner TV card is now installed. To connect external cables, see the next section.
ISA expansion slot
Rainbow Runner TV card
Mystique /
Rainbow Runner
Studio card
Rainbow Runner TV card
Ribbon
cable
Ribbon
cable
Rainbow
Runner TV
card
Millennium II /
Rainbow Runner
Studio card
(Mystique)
(Millennium II)