User guide

69
Specifying your audio output settings
11 Click the Calibrate button to calibrate your HDMI monitor or load HDMI
calibration settings using the Matrox HDMI Calibration Utility (see Chapter
8, “Calibrating Your HDMI Monitor for Video”).
¦NoteIn order to run the Matrox HDMI Calibration Utility, the HDMI output
type must be set to
RGB - calibrated (see step 10).
Specifying your audio output settings
MXO2’s simultaneous audio outputs allow you to send your audio to a variety of
devices at the same time. You can also map any audio track in your video
application to any MXO2 audio output. For descriptions of the MXO2 outputs,
see “Outputs” on page 151.
1 From the Apple menu, click System Preferences, and then click the
Matrox MXO2 or Matrox MXO2 Mini icon.
2 Click Audio Output.
¦NoteThe available MXO2 audio outputs depend on your MXO2 hardware.
3 Under Audio Mapping, select or clear the Enable audio mapping option.
If this option is cleared, your application’s audio track outputs will be routed
to the corresponding MXO2 audio outputs by default. For example, when
you output audio tracks as Pair 1/2 from your application, the audio will be
routed to the corresponding 1/2 MXO2 audio outputs.