User guide

131
Matrox Vetura Playback
Audio controls and Matrox 4VANC data
Audio meter and master volume When audio is enabled, the
digital audio meter lets you monitor the audio level for up to 16
audio channels. The master volume slider allows you to set the
audio level during playback. The dBFS levels are as shown below:
AFD track If your clip contains Matrox 4VANC AFD (active
format description) data, Vetura Playback will play back the AFD
data along with the video for output on MXO2, MXO2 Rack, and
MXO2 LE. In order to output AFD data, the data must be on audio
track 15. If the AFD data in your clip was not assigned to audio
track 15 when the file was exported from Final Cut Pro (see
“Settings for capturing Matrox 4VANC AFD” on page 90), you
must indicate which audio track contains the AFD data. To do so,
enable
AFD track by clicking the LED, and select the audio track in
your .mov file that contains the Matrox 4VANC AFD data.
When this option is enabled, Vetura Playback retrieves the AFD
data from the specified track and re-assigns it to audio track 15. As
a result, any audio track that comes after the specified track will
shift down by one track number. The number of available tracks are
limited to the number of audio tracks that are in your clip.
To output AFD data from MXO2’s SDI output, set the appropriate
settings as explained in “Matrox 4VANC AFD capture and
playback” on page 70.”
Any changes that you make to this option in the Vetura Playback
interface will override the AFD data settings in the Vetura Playback
preferences (see “Setting the Vetura Playback preferences” on
page 133).
Master
volume slider
-40 dBFS
-12 dBFS
-6 dBFS
0 dBFS