User guide

121
Matrox Vetura Capture
Capturing a clip
You can capture a clip using any codec that is installed on your system. A
captured clip is saved as a .mov file.
1 Connect the video and audio source that you want to capture to the
corresponding input on your MXO2 hardware.
2 Set the A/V input settings in the MXO2 preferences window (see Chapter 7,
“Configuring Your MXO2 System”).
3 To capture AFD and closed caption data, enable the corresponding Matrox
4VANC capture option in the MXO2 preferences window (see “Capturing
AFD and closed caption data” on page 120).
4 Start Matrox Vetura Capture, and set your capture settings as described in
“Setting the Vetura Capture preferences” on page 122.
5 To adjust the audio gain for the audio tracks in your source video for capture,
show the audio levels by clicking the
Volume Control button ( ), and
use the sliders to adjust the levels. Use the digital audio meter to monitor the
audio levels for each audio track. Audio levels over 0 dBFS will be clipped