User guide

268
Chapter 19, Monitoring Your Matrox MXO2 System
Using X.info to display MXO2 information
The Matrox X.info program lets you display information about your Matrox
MXO2 system and installed hardware, and provides warnings when certain
problems arise, such as when the temperature of your MXO2 exceeds the
maximum operating temperature. If you have multiple Matrox MXO2 devices,
you can use X.info to select your primary Matrox I/O device.
Matrox X.info runs continuously to monitor your system, whenever your
computer is turned on and the MXO2 is connected. You can open Matrox X.info
to display system and hardware details by double-clicking the icon on your
Windows taskbar.
¦NoteIf you do not see the icon, check your taskbar properties and make sure
that you’re showing the icon for Matrox X.info.
Displaying system information
To display information about your Matrox MXO2 system, select System from
the
Display Information About list. On this page, you can see Install
Information
, such as the install path and version of Matrox Mtx.utils.
You can also create an HTML log file of your system information, which can be
useful for troubleshooting. To create this log, use the
Browse button under
System Information Log to select the path and name of the log, then click