User guide

255
How to capture clips
How to capture clips
1 Connect the video and audio input sources from which you want to capture
clips to the corresponding inputs on your MXO2 hardware.
2 Choose Start > Programs > Matrox Mtx.utils> Matrox MAX H.264
Capture
.
3 Click Input Settings to select your video and audio input settings for
capturing clips as explained in “Specifying your input settings” on page 256.
4 Click Output Settings to select your video and audio output settings for
monitoring the source material that you’re capturing as explained in
“Specifying your output settings” on page 258.
5 Select a preset for the type of clips that you want to capture. The Matrox
presets available depend on the frame rate of your video input source.
6 Click the Advanced button to review the settings provided by your selected
preset and make any required changes as explained in “Specifying your
capture format settings” on page 260.