User guide

218
Chapter 15, Using Matrox MXO2 with Telestream Wirecast
9 Click to open Windows Explorer at the specified Record Path location
to view the recorded video/audio files, including the record log file
(Record.Log).
Once you’ve finished recording, you can import your recorded video and audio
files into an editing application, such as Adobe Premiere Pro, for post-event
editing.
Specifying settings in the Matrox ISO recording
tool
To specify the settings that you want for recording your clips, select any Matrox
device under
MATROX INPUT DEVICES in the Source Settings dialog box,
and then click the
ISO Record button.
¦NoteYou can hide or show the settings in the Matrox ISO Record dialog
box by clicking or respectively.
Record path
Under
Record Path, specify the destination where all your recorded clips will be
stored, or click
Browse to select the location that you want. Every recording
session generates a separate subfolder within the specified location, in the form
YYYY-MM-DD HHMMSS, which contains the recorded video and audio files,
and the log file (Record.Log) for that recording session.
Input selection
Under
Matrox Input, select the Matrox input(s) that you want to record. You can
also select or clear an input during a recording session (see “Input recording” on
page 223). You must have a valid input signal in order for an input to be recorded.
For more information on the input states and how they affect recording, see
“Input states and video formats” on page 225.”