User guide

3
Battery requirements and guidelines for MXO2
$ Microsoft Expression Encoder 4.
$ Livestream Procaster 20.3.7.
Check our website for equipment information
For up-to-date information about system requirements and MXO2-compatible
devices, check the Matrox MXO2 Support section of our website at
www.matrox.com/video/support.
¡ Important To use Matrox MXO2 with Avid editing software, you must use an
Avid-certified system as listed in the System Recommendations section of the
Matrox MXO2 Support section of our website at
www.matrox.com/video/support.
Battery requirements and guidelines for MXO2
¦NoteThis section does not apply to Matrox MXO2 Rack and Matrox MXO2
Mini as they cannot be powered by a battery.
As an alternative to using an AC outlet, you can use a battery to power Matrox
MXO2 or MXO2 LE. To avoid damage to your MXO2 system and peripheral
devices when using a battery, please observe the following requirements and
guidelines. For instructions on how to connect a battery, see “Powering MXO2”
on page 14 or “Powering MXO2 LE” on page 32.
• Use a standard self-protected (fused) battery with a nominal voltage of 12V,
13.2V, or 14.4V. A higher-voltage battery will damage your MXO2 system.
• Disconnect MXO2 from the battery when not in use. Do not leave MXO2
connected to the battery when not in use as this may damage your MXO2
system and/or battery.
• Do not power your MXO2 using your vehicle’s battery via the power socket.
²Caution To avoid damage to your MXO2 system and peripheral devices, use a
Matrox-recommended battery. For a list of batteries recommended for use with
your MXO2, visit the Matrox MXO2 Support section of our website at
www.matrox.com/video/support.
About this manual
This manual provides you with information about installing and using your
Matrox MXO2 hardware and software.
Style conventions
The following style conventions are used in this manual:
• The names of files, folders, and manuals appear in italics. For example:
$ The data is stored in the Sample.wav file.