User guide

96
Chapter 8, Using Matrox MXO2 with Adobe Premiere Pro
$ Insert Records selected tracks (video and/or audio), without affecting
the control track. This lets you perform a video or audio dub. For
example, you can choose to record only video, only selected audio tracks,
or video and selected audio tracks from your sequence.
¦NoteCheck your device’s documentation to determine its recording
capabilities for assemble and insert editing. To perform an insert edit, the edit
mode for Matrox device control must be set to
Auto Edit or Basic Edit as
explained in “Setting up Matrox device control” on page 90.
$ Select Abort export on dropped frames if you’d like the export to tape
to automatically stop when dropped frames are encountered. You’ll get a
warning if the export to tape is aborted due to a dropped frame.
8 Use the transport controls to play back your tape. The current time code of
your tape appears in the text box above the transport controls. You can also
use the
J, K, and L shortcut keys to control the shuttle. Press J to shuttle left,
L to shuttle right, and K to stop. Pressing J or L multiple times increases the
speed of the shuttling.
9 Specify where you want the recording to start and stop as follows:
$ Click the Set In Point button ( ) to specify where you want the
recording to start, or enter the required time code in the
In box.
$ Click the Set Out Point button ( ) to specify where you want the
recording to stop, or enter the required time code in the
Out box.
Alternately, you can select
Duration and enter the duration you want for
the recording. The Out point will then be calculated for you. By default,
the duration is set to the duration of the work area. You can click
Reset at
any time to set the duration back to the duration of the work area.
¦NoteWhen Out is selected, the duration is calculated based on your
selected In and Out points. When
Duration is selected, the Out point is
calculated based on your specified In point and duration.
10 Click Export to start the export to tape.