User guide

Matrox Mura MPX Series – User Guide 9
Using a multi-display layout with an uneven number of columns
This multi-display layout shows a 5 × 5 display wall. In this case, monitors are paired but don’t follow
each other sequentially from left to right. In this case, the GPUs associated with the last card (
K1 , K2 ,
L1 , L2 , M1 ) are placed in the last column of the layout.
Depending on your installation and connection, you may need to manually rearrange the outputs of
your multi-display layout in PowerDesk to match the physical layout of your display wall.
For more information on setting up multiple displays, see “Setting up your multi-display layout”, page
29.
After planning your output layout, you’re ready to install your cards (see “Installing your cards”, page
10).