User guide

Matrox Mura MPX Series – User Guide 5
Overview
Thank you for purchasing a Matrox Mura MPX Series product. This product combines the
capabilities of input and output cards onto a single card. Mura MPX Series cards are designed to work
as a standalone solution and with other Matrox display wall products.
Hardware supplied
*
 Mura MPX-4/0 – Mura MPX card, 1 KX20 to quad-DVI cable, 4 DVI to HD-15 adapters,
2 ribbon cables (for framelock).
 Mura MPX-4/2 – Mura MPX card, 1 KX20 to quad-DVI cable, 1 KX20 to dual-DVI
cable, 6 DVI to HD-15 adapters, 2 ribbon cables (for framelock).
 Mura MPX-4/4 – Mura MPX card, 2 KX20 to quad-DVI cables, 8 DVI to HD-15
adapters, 2 ribbon cables (for framelock).
 Mura MPX-V8 – Mura MPX card, 1 DVI to BNC adapter, 1 ribbon cable (for
framelock).
 Mura MPX-V16 – Mura MPX card, 2 DVI to BNC adapters, 1 ribbon cable (for
framelock).
 Mura MPX-SDI – Mura MPX card, 1 KX20 to dual-DVI cable, 2 DVI to HD-15 adapters,
2 DIN to BNC adapters, 2 ribbon cables (for framelock).
Optional hardware (sold separately)
Depending on your connection setup, you may also need any of the following hardware:
 BNC to Composite (RCA®) adapter
 BNC to S-video adapter
 DVI cable (male to male)
 DVI to Component adapter
 DVI to Composite (RCA) adapter
 DVI to S-video adapter
* The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more
information, contact your Matrox representative.