User guide

Matrox Mura MPX Series – User Guide 47
Setting up your multi-display layout
Setting up your multi-display layout to use a display console using PowerDesk software involves
entering the number of columns and rows for your display wall layout, adding an independent
display, and adjusting the settings for your outputs (such as rotation, resolution, color palette, and
refresh rate).
To set up your multi-display layout:
1 Access Matrox PowerDesk.
2 From the main interface, click Multi-Display Setup .
3 Under Basic configurations , select Use stretched mode .
4 Enter the number of Columns and Rows for your multi-display setup, then click OK .
5 Drag one output of your P690 card from the Unused outputs section to your work area.
You can also add an output by right-clicking it and selecting
Add output .
The outputs of your P690 card are always identified as the last of your outputs.
6 Preview your setup in the work area. If you’re satisfied, click OK or Apply to apply your
multi-display layout. Otherwise, click
Cancel .
Depending on your installation and connection, you may need to manually rearrange
the outputs of your multi-display layout in PowerDesk to match the physical layout of
your display wall.
7 Optional – To view your Start menu to your console display and not on your display
wall, set your console display as the main display of your multi-display configuration.
For more information on setting up multiple displays, see Matrox PowerDesk help.
Note: For information on using stretched mode, see Matrox PowerDesk help.