User guide

Matrox Mura MPX Series – User Guide 43
P690 PCIe ×16
1 Connect your monitors
If your monitor has a DVI connector,
connect your monitor cable directly to your
DVI connector on your card.
If your monitor has an HD-15 connector,
use a DVI to HD-15 adapter included with
your product to connect your monitor cable
to your DVI connector on your card.
Your Matrox card is now installed. Restart your system and install your Matrox software (see
“Installing your software”, page 46).
P690 Plus LP PCIe ×16 with a dual monitor cable
1 Connect your LFH-60 to dual-
DVI cable
Attach your LFH-60 to dual-DVI cable to
the connector on the bracket of your Matrox
card. Make sure the connector is properly
fastened.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
LFH-60 to dual-DVI
cable (LFH-60)
WA R N I NG : To avoid damaging the LFH-60 connector on your dual-monitor cable or on
your graphics card, carefully insert the connector on your dual-monitor cable as straight
as possible into the connector on your graphics card. Specifically, inserting the connectors
into each other at an angle is likely to bend and damage the pins on the connector of the
dual-monitor cable.