User guide

Matrox Mura MPX Series – User Guide 21
2 Connect your video device
Component connector – If your video
device has a component connector, you
need a DVI to Component adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the component connector
on your adapter.
Composite connector – If your video device
has a composite connector, you need a DVI
to Composite (RCA) adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the composite connector on
your adapter.
S-video connector – If your video device has
an S-video connector, you need a DVI to
S-video adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the S-video connector on
your adapter.
Your Matrox card is now installed. Restart your system and install your Matrox software (see
“Installing your software”, page 27).
DVI to Component
adapter
Component video
cable
KX20 to quad-DVI
cable (DVI)
DVI to Composite
(RCA) adapter
Composite video
cable (RCA)
KX20 to quad-DVI
cable (DVI)
S-video cable
DVI to S-video
adapter
KX20 to quad-DVI
cable (DVI)