User guide

20 Matrox Mura MPX Series – User Guide
3 Connect your monitor cable
If your monitor cable has a DVI connector,
connect your monitor cable directly to your
KX20 to quad-DVI cable or your KX20 to
dual-DVI cable.
If your monitor cable has an HD-15
connector, use a DVI to HD-15 adapter
included with your product to connect your
monitor cable to your KX20 to quad-DVI
cable or your KX20 to dual-DVI cable.
Using video devices as input sources
This section describes how to connect a video device to the input connector on your Mura MPX-4/4
or MPX-4/2 card.
1 Connect your KX20 to quad-DVI
cable or KX20 to dual-DVI cable
MPX-4/4 – Attach the KX20 to quad-DVI
cable included with your Mura product to
connector
A on the bracket of your Matrox
card. Make sure the connectors are properly
fastened.
MPX-4/2 – Attach the KX20 to dual-DVI
cable included with your Mura product to
connector
A on the bracket of your Matrox
card. Make sure the connectors are properly
fastened.
Monitor connector
(HD-15)
Monitor
connector
(DVI)
KX20 to quad-DVI
cable (DVI)
DVI to HD-15
adapter
KX20 to quad-DVI
cable
KX20 to dual-DVI
cable