User guide

Matrox Mura MPX Series – User Guide 19
Connecting your input sources
This section explains how to connect your input sources to your Mura MPX-4/4 or MPX-4/2 card.
Using graphics cards as input sources
This section describes how to connect the output of a graphics card (installed in another system) to
the input connector on your Mura MPX-4/4 or MPX-4/2 card.
1 Connect your KX20 to quad-DVI
cable or KX20 to dual-DVI cable
MPX-4/4 – Attach the KX20 to quad-DVI
cable included with your Mura product to
connector
A on the bracket of your Matrox
card. Make sure the connectors are properly
fastened.
MPX-4/2 – Attach the KX20 to dual-DVI
cable included with your Mura product to
connector
A on the bracket of your Matrox
card. Make sure the connectors are properly
fastened.
2 Connect a graphics card
Connect one end of your monitor cable to
the connector on your graphics card. For
more information on the connection setup
of your graphics card, see its user guide.
KX20 to quad-DVI
cable (KX20)
KX20 to dual-DVI
cable (KX20)
Graphics card
Monitor cable
(HD-15)
Monitor cable
(DVI)
DVI to HD-15
adapter