User guide

Matrox Mura MPX Series – User Guide 13
Installing multiple cards
Your chassis model may support the installation of multiple Mura MPX cards in your system. For
information on validated platforms, contact your Matrox representative or see the Matrox Web site
(www.matrox.com/graphics
).
Interconnecting multiple cards
If you have multiple Mura MPX cards installed in your system, you can synchronize all your
outputs by interconnecting your cards with the ribbon cable included with your product.
Attach the ribbon cable to the connector
labeled
Out on one card to the connector
labeled
In on the next card. Depending on
the length needed, use either the long or
short ribbon cable included with your
product.
Repeat this for every card installed.
WA R N I NG : To avo i d d a m a g i ng yo u r
cards, always insert your card as straight as
possible into the slot. Don’t rock the card
from side to side. If you meet resistance,
don’t force the card into the slot.
Out In