User guide

12 Matrox Mura MPX Series – User Guide
3 Insert your Matrox card
a Position your Matrox card over the
expansion slot you’ve chosen.
b Push the card in firmly and evenly until
it’s fully seated in the slot.
c Secure the bracket of your Matrox card
to the frame of your system.
4 Secure the bracket of your Matrox card
To support the weight of your cable and to avoid damaging your Matrox card, you need to
properly secure the bracket of your card to your system.
a To secure your bracket, slip the washer
provided with your Matrox product
over the connectors, then screw the
washer onto the bracket of your Matrox
card.
b Make sure the washer lies flat against the
frame of your system.
Your Matrox card is now installed. If you’re installing more than one card, see “Installing multiple
cards”, page 11.
Before restarting your system , connect your monitors or devices (see the “Connection
setup” section for the card you want to connect).
After connecting , restart your system and install your
Matrox software.
Washer
Matrox
card