Specifications

62 Matrox Mura MPX Series – System Builder’s Guide
Appendix
Approved fans for iStarUSA
®
chassis
Notes
List of approved fan vendors:
 Sunon: PMD1212PTB3-A (2).GN
 Yen-Sun: FD121225EB
 Delta: AFB1212HHE-C
 Adda: AG12012XB257100
 NMB: 4715KL-04W-B40
To assemble the fan connectors to the lead wires on the fan,
the following parts are needed:
 Molex 15-24-4048 (Crimp housings)
 Molex 02-08-1201 (Female crimp connectors)
Depending on the voltage rating of the fan, the pin placement
is the following:
 Pin 1: +12V
 Pin 2: GND (usually the black lead from the fan)
 Pin 3: GND (only one of the two GND pins needs be
connected)
 Pin 4: +5V (leave unconnected if connecting a 12V fan)
Warning: The fan may not work properly or may be damaged
if the pins are improperly connected.