Specifications

Matrox Mura MPX Series – System Builder’s Guide 47
Power supply
 iStarUSA –
 800W iStarUSA redundant power supply with mounting
bracket for D-400 (P/N: IS-800R3NP)
OR
 750W iStarUSA single regular power supply (P/N: TC-
750PD1)
 Advantech – Use the 700W power supply included with the
chassis.
Power supply bracket
 iStarUSA –
 Redundant power supply – Use the bracket included
with the power supply.
 Regular power supply – Use the standard bracket
included with the chassis.
 Advantech – Use the standard bracket included with the
chassis.
Fan
 iStarUSA – 120 CFM fan (front fan assembly). Fan to be
ordered separately from the list of approved vendors. For
more information on approved fans and fan vendors, see
“Approved fans for iStarUSA® chassis”, page 62.
 Advantech – Included with chassis.
Available PCIe expansion slots
 2 PCIe ×16 3.0 slots at ×16 mode
 2 PCIe ×16 3.0 slots at ×8 mode
 2 PCIe ×16 2.0 slots at ×1 mode
Expansion slot configuration
 If you’re installing one card, insert the Mura card in the slot
labeled
PCIEX16_1 .
 If you’re installing two cards, insert the Mura cards in the
slots labeled
PCIEX16_1 and PCIEX16_2 .
 If you’re installing up to four cards, insert the third and fourth
Mura cards in the slots labeled
PCIEX8_1 and PCIEX8_2 .
Performance considerations
 1-2 cards Æ ×16
 3 cards Æ 1 ×16 + 2 ×8
 4 cards Æ ×8
Notes
 iStarUSA – The chassis and power supply must be ordered
from iStarUSA.
 The fan must be ordered from a separate fan vendor. For
more information on approved fans and fan vendors, see
“Approved fans for iStarUSA® chassis”, page 62.
 For multi-card configurations, longer ribbon cables (for
framelock) are required (P/N: F16279-00). For more
information, contact your Matrox representative.