Specifications

Matrox Mura MPX Series – System Builder’s Guide 43
Chassis
 iStarUSA Kit 1 + Kit 2
 iStarUSA Kit 1 – 400 chassis with black doors and 2x
80mm fans (P/N: D-400-2F80)
 iStarUSA Kit 2 – Custom fan bracket (P/N: DD-FANGUARD-
12-MAT01)
Power supply
 iStarUSA –
 800W iStarUSA redundant power supply with mounting
bracket for D-400 (P/N: IS-800R3NP)
OR
 750W iStarUSA single regular power supply (P/N: TC-
750PD1)
Power supply bracket
 iStarUSA –
 Redundant power supply – Use the bracket included
with the power supply.
 Regular power supply – Use the standard bracket included
with the chassis.
Fan
 iStarUSA – 120 CFM fan (front fan assembly). Fan to be
ordered separately from the list of approved vendors. For
more information on approved fans and fan vendors, see
“Approved fans for iStarUSA® chassis”, page 62.
Available PCIe expansion slots
 4 PCIe ×16 3.0 slots at ×16 mode (blue)
 3PCIe ×16 3.0 slot at ×8 mode (black)
Expansion slot configuration
 If you’re installing one card, insert the Mura card in the slot
labeled
PCIEX16_1 .
 If you’re installing two cards, insert the Mura cards in the
slots labeled
PCIEX16_1 and PCIEX16_5 .
 If you’re installing three cards, insert the Mura cards in the
slots labeled
PCIEX16_1 , PCIEX16_3 , and PCIEX16_5 .
 If you’re installing four cards, insert the Mura cards in the
slots labeled
PCIEX16_1 , PCIEX16_3 , PCIEX16_5 , and PCIEX16_7 .
 If you’re installing up to 6 cards, insert the remaining two
cards in the slots labeled
PCIEX16_2 and PCIEX16_6 .
Performance considerations
 1-4 cards Æ ×16
 5 cards Æ 2 ×16 + 3 ×8
 6 cards Æ 2 ×16 + 4 ×8
Notes
 iStarUSA – The chassis and power supply must be ordered
from iStarUSA.
 The fan must be ordered from a separate fan vendor. For
more information on approved fans and fan vendors, see
“Approved fans for iStarUSA® chassis”, page 62.