Specifications

Matrox Mura MPX Series – System Builder’s Guide 23
HP
®
Z620 Workstation
InoNet Magnius-II
Supported Mura cards 2 (supports intercard transfers)
Chipset Intel
®
C602
Processor Intel
®
Xeon
®
E5-2640 processor, 2.50 GHz
System BIOS version J61 V01.02
System memory 12 GB ECC DDR3
Power supply 800W
Available PCIe expansion slots
 2 PCIe ×16 3.0 slots
 1 PCIe ×8 3.0 slot
 1 PCIe ×8 2.0 slot (×8 mechanical, ×4 electrical)
 1 PCIe ×4 2.0 slot (×4 mechanical, ×1 electrical)
Expansion slot configuration Insert Mura cards in slots labeled
PCIe3 ×16 .
Notes
 A ribbon cable is required to framelock two Mura cards
(P/N: F16279-00). For more information, contact your
Matrox representative.
 To remove one of the two cards, remove the module that
houses the second CPU. This module hides the board
retaining clip.
Supported Mura cards 2 (supports intercard transfers)
Motherboard Advantech ASMB-781
Chipset Intel
®
C206
Processor Intel
®
Xeon
®
E3-1200 processor
System BIOS version 1.1
System memory 8 GB DDR3
Power supply 500W redundant
Available PCIe expansion slots
 2 PCIe ×16 2.0 slots
 1 PCIe ×4 2.0 slot
 1 PCIe ×1 2.0 slot
Expansion slot configuration
 If you’re installing 1 card, insert the Mura card in the blue
slot labeled
PCIE6 .
 If you’re installing 2 cards, insert one card in the blue slot
labeled
PCIE6 and the other card in the slot labeled PCIE4 .
Performance considerations
 1 card Æ ×16 (use the slot labeled PCIE6 )
 2 cards Æ ×8 (autoswitch to ×8 when slot labeled PCIE4 is
used)