Specifications

ManualsBrandsMatrox ManualsComputer equipmentMura MPX-4/4

Matrox Mura MPX Series – System Builder’s Guide 21

Z420 Workstation

Available PCIe expansion slots

 4 PCIe ×16 3.0/2.0 slots (dual ×16 or ×16, ×8, ×8, or quad

×8)

 2 PCIe ×1 2.0 slots

Expansion slot configuration

 If you’re installing one card, insert the Mura card in the slot

labeled

PCIe 3.0/2.0 ×16_1

 If you’re installing two cards, insert the Mura cards in the

slots labeled

PCIe 3.0/2.0 ×16_1

and

PCIe 3.0/2.0 ×16_3

 If you’re installing up to four cards, insert the third and fourth

Mura cards in the slots labeled

PCIe 3.0/2.0 ×16_2

and

PCIe 2.0

×16_4

Possible maximum configuration 4 Mura MPX-4/4 cards

Supported Mura cards 3 (2 MPX-4/4 + 1 MPX-V16)

Chipset Intel

C602

Processor Intel

Xeon

E5-1607 processor, 3.00 GHz Quad Core

System BIOS version J61 V03.15

System memory 6 GB UDDR3

Power supply 600W

Available PCIe expansion slots

 2 PCIe ×16 3.0 slots (×16 mechanical and electrical)

 1 PCIe ×8 3.0 slot (×8 mechanical and electrical)

 1 PCIe ×8 2.0 slot (×8 mechanical, ×4 electrical)

 1 PCIe ×4 2.0 slot (×4 mechanical, ×1 electrical)

Expansion slot configuration

 Insert the first Mura MPX-4/4 card in the slot labeled

slot2

PCIe3 x16.

 Insert the second Mura MPX-4/4 card in the slot labeled

slot5 PCIe3 x16.

 Insert the Mura MPX-V16 or MPX-V8 card in the slot labeled

slot3 PCIe2 x8(4).

Notes

A ribbon cable is required to framelock two Mura cards

(P/N: F16279-00). For more information, contact your Matrox

representative.