Specifications

46 Appendix B: Technical information
PC/104-Plus form
factor
Matrox Meteor-II for the PC/104-Plus form factor (stand alone version) has four
interface connectors: video input, a PC/104-Plus (PCI) connector, and two
PC/104 (ISA) connectors.
Note that the video input connector for the PC/104-Plus board built for
Matrox 4Sight-II is right-angled, unlike the one for the stand-alone version,
discussed here. See Note about Matrox Meteor-II /Multi-Channel for PC/104-Plus in
Chapter 2 for more details.
Video input connector on the PCI form factor
The video input connector is a high density DB-44 female connector on the PCI
form factor. Its pinout is as follows:
Pin Signal Description
15 VID1_IN1 RED Analog Video Input (Channel 1).
44 VID1_IN2 GREEN Analog Video Input (Channel 1).
13 VID1_IN3 BLUE Analog Video Input (Channel 1).
43 SYNC_IN Analog Video Input (SYNC).
11 VID2_IN1 RED Analog Video Input (Channel 2).
PC/104-
(PCI)
connector
Plus
PC/104
(ISA)
and P2
connectors
P1
Video input
connector
P1
P2
pin 1
pin 31
pin 16
pin 44
pin 15
pin 30