Specifications

Installing Matrox Meteor-II /Multi-Channel 19

2. Check that you have an available PC/104-Plus connector on the motherboard, or

verify that your existing stack can support another board.

3. Remove the anchoring screws from the stack; do not discard them since you will

need them to fasten the Matrox Meteor-II board.

4. If you have existing PC/104 boards in your computer, remove them and stack

them on the PC/104-Plus board. PC/104 boards must be stacked last.

5. Carefully position Matrox Meteor-II over the connectors and press the board

firmly into place.

6. Replace the anchoring screws.

7. Set the rotary switch (next to the PC/104 (ISA) P2 connector) to 0 if installing

the first stackable board, or another appropriate setting if not the first. See the

section, Multiple board installation, in Chapter 3.

8. Connect your video sources. For details, see the Connecting external devices section.

9. Turn on your computer.

Motherboard

PC/104-

(PCI) connector

Plus

PC/104

(ISA)

P1 and P2

connectors

Rotary

switch

Video input

connector